Hakko FM-203 (C1551 Solder Station Only)

Hakko FM-203 (C1551 Solder Station Only)

Your Price: $459.99
Out of Stock.
Part Number:5064

FM-203 DUAL PORT SOLDERING STATION

The FM-203 offers two ports for a variety of soldering tools that can be used in a variety of combinations, including soldering irons, SMD hot tweezers and/or desoldering tools (see table below).

The FM-203 can power the following HAKKO handpieces:

• FM-2027 soldering iron
• FM-2032 micro soldering iron
• FM-2024 desoldering tool 
• FM-2022 parallel remover (hot tweezer)
• FM-2023 mini hot tweezer
• FM-2026 nitrogen soldering iron
• FM-2030 heavy duty soldering iron
• FM-2031 nitrogen heavy duty soldering iron

Simultaneous UseChannel DChannel S
YesFM-2027 soldering iron.
No
- only one handpc will operate -
FM-2022 parallel remover
hot tweezer
FM-2027 soldering iron
No
- only one handpc will operate -
FM-2023 mini hot tweezerFM-2024 desoldering tool *
YesFM-2024 desoldering tool *FM-2026 N2 soldering iron†
YesFM-2026 N2 soldering iron†FM-2032 micro soldering iron
YesFM-2032 micro soldering iron 
YesFM-2030 heavy duty soldering iron 
YesFM-2031 N2 heavy duty soldering iron 

 

* Note: The FM-2024 desoldering tool requires the P/N: FM2024-21 conversion kit which includes Desoldering Control Box, P/N: C1492.
† Note: The FM-2026 handpiece needs nitrogen (N2) generator (HAKKO FX-780), controller (HAKKO FX-791) compressor, regulator, etc.


The FM-203 features:

• process control so you can select any temperature you want without changing the tip - one tip, any temperature!

• temperature range 200 - 450°C (400 - 840°F)

• temperature accuracy ±15°C

• LED in handpiece tells the operator the iron is hot

• auto shutoff

• sleep mode functionality

• No Calibration Necessary

Note: Tips are NOT included.


Part Number: C1551
 
Attention: Station ONLY (handpieces NOT included)

See Specifications for more details.


Note: The FM-203 stations with serial numbers before 02203211002129 will require the purchase of an upgrade. Due to the upgrade process requirements, upgrades cannot be performed in the field. Stations must be returned to American Hakko under an CASE for this upgrade, at which time the upgrade (PN: FM203-UPGR) can be purchased with the FM2030-02 kit and your selection of T22 tips.

Related Items

Hakko Omnivise C1390C
$54.99
T30 - KN
$39.99
Quick 861DW Rework / Hot Air Station
$339.99